• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to decay or rust as timber and aluminum.

It is important to clean and oil UPVC doors and windows on a regular basis. This will help prevent costly repairs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home, and could even be fatal. It is important to take the time to make sure that you're doing everything you can to ensure that your windows are in good repair.

Single-pane windows are relatively simple to replace, and they will usually fit into the frames that were previously in use very easily. However, if windows with double panes are anchored by internal beading, it'll be more difficult to remove the panes that are in place and replace them with new ones. In this instance you'll need locate some plastic spacers to help the new pane to fit perfectly into the frame of the window.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass yourself. You should also lay down a dropcloth prior to you begin working on the window panes so that any shards fall onto the fabric and not on the floor and could be trampled under.

It's a great idea to tape the gap once the glass has been removed. This will keep water and drafts from entering your property until a professional is able to fix the window. It also acts as an obstruction to prevent intruders from getting into your home. If the gap is large, you might be interested in a security door that has an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable, durable and energy-efficient alternative to timber sash windows. Over time, they can develop a number of problems that include sagging. A sagging window can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it's crucial to act fast to prevent the problem from getting worse.

To fix a sagging window you can try repositioning the hinges. To do this, you'll have to open the window so that you can access the frame. Then, remove both the hinges at the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. After you've repositioned the hinges, close the window and check for an appropriate fit. If you're satisfied with the fit, tighten the screws to ensure that they stay in place.

If you can't reposition the hinges, you might require replacing the seal. Seals made of rubber can dry out and lose their elasticity with time, leading them to lose their tightness. If this happens, it's essential to replace the seal as quickly as you can to ensure that your uPVC windows remain watertight and draught-proof.

UPVC handles can also become loose. This is usually due to screws that have been removed over time, but it can also be due to the mechanism of the handle getting worn out. It's fairly simple to fix a loose upvc window repair (the original source) handle. First, you'll need to close your window and do a test fit. The joint at the corner of the sash must align with the joint on the casing. If it isn't, you can use a screwdriver or a wrench to loosen the handle and then reverse the mechanism back into the position it was in.

3. Water Leaks

If you awake to wet floors and mouldy walls every time it rains it is important that you take action. The leaks of water from windows do can not only cause degrading of the structure of your home but also undermine your efforts to control the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant around the frame is damaged or is missing.

This is a relatively easy fix that can be done by any DIY expert. Based on the severity of the issue the caulking used previously may need to be removed before a new layer can be put on. It is essential to keep in mind that when it comes to uPVC window repairs you should not be tempted to apply too much caulk' as this will only make the area harder to clean and reduce your energy efficiency.

Make sure that the drainage holes do not have debris in them, and also that the sill pan has been properly angled to allow the water to drain from the window. In more severe cases, you may need to replace the window.

Mold spots and rotten sills are also signs of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the house.

It is also important to keep in mind that if the leak is coming from between the glass of your double-glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. It is also possible to be fixed by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or it opens in an ease. Any competent DIYer can replace hinges in just a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that use hinges and, just like any mechanical component they will wear out over time. It is an easy process but it can be easier to do when you have a person to help hold the frame up.

It is also important to verify that the uPVC hinges are opened and closed in the correct direction. You can check this by looking for the arrow on each hinge. This indicates the direction in which the window should open.

The problem can be caused by opening the window incorrectly or by a poor installation in the factory. Sending us a photo via our website is often enough to solve the issue. We are more than happy to give assistance.

It is also crucial to lubricate the hinges regularly. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window to operate and close more smoothly. It also decreases the chance of windows sticking and help prevent corrosion. This must be done at a minimum every year. WD40 and other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by different factors. Firstly the hinges, again due to wear and tear could become misaligned. This will cause an opening to appear where the sash joins the frame. If they are damaged beyond repair, it may be required to realign them. The second is the interlock, which is located on the hinge of the window, may also become misaligned, again it may be possible to give them a clean but in some instances it could be necessary to have these replaced.

The seals may wear out or become damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity glasses. This will help regulate indoor temperatures and decrease the possibility of draughts.

The final method to cut down on draughts effectively is by using a Draught-exclusion device. These are usually fabric tubes filled with a filler which can be put on top of your window sill. They will keep your home warm by blocking out cold air.

Your windows made of upvc will continue to provide excellent insulation and security to your home with regular maintenance and repairs. It is important to remember that all windows will eventually become worn out, and it may be cheaper to replace them instead of fixing them. If you encounter any issues with your window made of upvc it is recommended to speak with a professional immediately.