• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

how to program subaru key to Programming a Subaru Key Fob at Home

You might need the key fob to be programmed by an automotive locksmith or Subaru dealer, based on how old your Subaru is. This is typically done by connecting a programming machine to the computer in the car.

To program your Subaru, start by unlocking the driver's door using the door button control and then close it. You will hear the chime, and see the dome lights flashing in the instrument panel.

Step 1: Locate your transmitter circuit board

There are many ways to program your key fob. First, you need to determine the type of key fob that you own. This can be done by looking at the form of the key fob, or by listening to the chime in your car.

Once you have these details, you are able to start the process of programming your key fob from home. To do this, you will require a key made of metal and a screwdriver with a flat head. The key fob case can be opened by twisting it. Then push the metal key into the case and then release the battery from the tiny tabs which hold it in place. Replace the battery with a fresh one and put the key fob case back together.

Step 2 2. Unscrew the Key Fob Case

It is an ideal idea to change the battery in key fobs if they aren't working. However, there are some cases where to get a subaru key made the buttons in the key fob could be damaged. If you can see that the button's contacts made of metal have come loose, you can try the process of re-soldering them in order to make them function again.

Make sure that you shut off your ignition and close your doors prior to you begin. You can do this by closing the driver's door and pressing your door button ten times in quick sequence. Then, you'll hear the instrument panel chime and your dome lights should flash. This indicates that you're ready to move on.

Step 3: Put the Key Fob in the Ignition

Many articles on the internet will tell you how to get a new subaru key to program your brand new or Replacement Subaru Key subaru immobilizer key programming keyfob at home. But, the majority of them don't offer specific instructions. Reprogramming an electronic key is best handled by an experienced auto dealer in Fort Bliss or a locksmith.

Sit in the driver's seat of your Subaru with the engine off and all doors closed. The door button control should be opened and use it to unlock all doors. Open and close the door to the driver's side two more times. Then insert and remove the key from the ignition switch (don't turn it) 10 times within 40 seconds. The system should sound chirps to confirm that the settings have been altered.

Step 4 Step 4: Switch on the ignition

It is crucial to note that this method of programming a key fob is effective if you have a functioning key. If not you can find an auto-locksmith or dealer who will need to program the key for your Subaru Fort Bliss.

Once the key is programmed, it will be in a position to start your vehicle in about 5 minutes. Start by closing all doors, then turning off the engine. Sit in the driver's seat and unlock all doors by pressing the button for the door. Place the key into the ignition and turn it on to the first position (the electrical systems will turn on, but the engine is off) then turn it back to the off position 10 times in rapid succession.

Step 5 Step 5: Unlock Driver's Door

Subaru has a broad selection of high-end vehicles with key fobs, which can lock and unlock doors, start the car, and defrost the windows. However, sometimes, these devices stop working properly.

To fix the issue to resolve the issue, you should call a locksmith or the dealer. This will solve the issue and make sure that your car is safe.

To do this, open the driver's door, then close it. Then, insert the key in the ignition and move it to the first position. Then, turn it back to the off position. Do this ten times in one row as fast as possible. After the tenth time, you should hear a sound.

Step 6: Press the Lock/Unlock button on the driver's Door

If you need to replace the battery in the Subaru key fob, the procedure is simple. The fob's case on the outside is opened. Then you can use an flathead screwdriver, to pry open the interior case and remove the old battery.

After you have removed the old battery, put in the new one and close the case. Sit in the driver's seat and unlock all doors using the door-button control. Place the key in ignition and turn it so that the electric system is on, but the engine remains off. Repeat this 10 times until you hear a chime from the instrument panel. This will enter the system into programming mode.

Step 7 7. Press the Lock/Unlock button on the Passenger's Door

For some owners, the annoyance chirp heard when locking and unlocking a Subaru key fob from outside can be distracting. In some instances, you can disable the chirp by opening and closing all doors while double-clicking the lock button on the key fob.

Close all doors including the lid that holds the fuel, and turn off the ignition. Press and hold the lock side of the key fob's lock button for 10 seconds. Once this is completed, the instrument panel emits an audible chime. The chime signifies that the door and fuel-filler lid are locked. It is possible to alter the setting to make the doors lock automatically without pressing a button.

Step 8: Enter the 8-Digit Transmission Number.

Keep the first 8 digits of the code in your head. Then, get into your driver's chair, close all the doors and then turn the key to the first position (towards on). After ten turns your instrument panel should sound once.

Then, you need to open the key fob case and locate the circuit board of the transmitter inside. The circuit board will have one or two numbers with 8 digits. Note the first sequence of numbers, and follow the directions in this guide to register the code on your vehicle's system. For older models, this process might require a visit to the dealer.