• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Glazing Repairs

Making repairs to your glazing correctly can boost your home's value. This will also improve the efficiency of your window or doors.

It isn't always easy to determine what the issue you're experiencing is one that requires professional assistance. Here are some of the most common problems that need to be addressed:

Seals that are damaged

Window seals are an essential part of your glazing system. They secure the windows, insulate them and seal against outside air and moisture. Although they are designed to last a long time and may require repair or replacement, the fact is that they'll need to be replaced at some point. The good news is that there are many options for repairs depending on your budget and timeframe.

Fogging in your double glazed window repairs near me paned insulated glass unit is among the most common indications that the window seals are failing. Foggy windows may be caused by an unsound seal between two glass panes in your IGU. This can allow moisture to seep through and cause condensation. Although you can try some quick-fixes to defog your windows, such as using a steamer or window putty, the best solution is to have your window seals repaired by an expert.

In addition to allowing condensation and fogging between the window panes, a failing seal could cause your windows to lose their insulating value. The space between the two panes is filled with an inert gas like argon or xenon which assists the IGU in resisting thermal transfer and maintain heat within the home. The IGU's insulating benefits will be lost when the window seal fails. Your energy bills will also rise.

Gaskets made of rubber begin to degrade with time due to exposure and aging. The process is accelerated by poor maintenance or environmental factors, such as UV radiation. If not addressed, this could cause water intrusion into the building envelope resulting in the growth of mold and mildew. This can eat away at the frame and sash of your IGU and cause damage to the appearance of the building and compromising insulation.

The best way to avoid the loss of window seals is to perform regular maintenance and avoiding common errors. For instance, you should avoid using high-pressure washers to clean your windows, because it could work its way into the sash, and damage the seal. Also, don't add a reflective window film to your insulated glass because it could void the warranty and damage the sealant material. Also, be cautious when using chemicals such as paint strippers, since they can cause damage to the sealant and cause it to fail.

Broken Glass

Broken glass is a problem that needs immediate attention. A broken pane in a window can fall and break other windows, or create drafts and even insects or water to enter your home. A broken glass pane could also pose a risk to anyone who comes in contact with it, especially children or pets. In addition to being a safety hazard broken glass is difficult to remove and may cause further damage to frames, sash and adjacent surfaces.

If a window is cracked, the first step is to board it up using the cross-patch of duct tape to stop the glass from shattering further and keep bugs, rain, and debris out of your home until you can replace the glass. This method is particularly crucial for upper-story windows.

Then, be sure to take precautions by putting on thick protective eyewear and gloves that are cut-resistant. With a putty or pliers remove the old glazing points from the recesses of the frame. Once the glass is removed, you must clean the entire area to prepare it for a new window.

After measuring the window's opening, it's essential to make sure that the replacement is exactly the right size. Most glaziers will have standard-sized panes on hand, but if energy-efficient glass or safety glass is required, it might require cutting to fit the frame. To avoid any mistakes make sure you measure the opening of your window and subtract approximately 1/8 to 1/4 inch from the new pane.

When you're ready to install the glass you just bought, insert it carefully into the frame and ensure it's an even fit with the rabbets that hold it. A glass pane that's too big could cause clouding and swelling of the wood around it, while one that's too small could fall off the frame and let drafts in your home.

Once you've made sure the new pane is secured, roll another cord of compound for glaziers' around the glass's perimeter to seal it to the frame and sash. Smooth the compound using your finger, ensuring that it's evenly distributed across the new pane. Once dry, paint the newly glazed compound and frame to match the rest of your window.

Structural Problems

The strength and structural integrity of curtain wall and framing systems is essential for the safety, compliance, and performance of glass surfaces. During an inspection, a professional examines anchor points, fasteners, and supports for signs of corrosion, deterioration, or misalignment. He or she will also inspect the gaskets and sealants to ensure they are installed correctly and are not leaking.

Rusted frames and sagging walls are structural issues that must be addressed. These problems can be very risky and could cause severe damage over the course of time. It is important to take care of any structural issues as quickly as possible to avoid costly repairs later on.

Curtain wall systems require a lot of structural support to withstand the forces of wind and other stress. The water intrusion caused by these components could be costly and damaging. The main causes for these failures include poor construction, design flaws and poor installation.

Another problem that is frequently encountered is warping, which can cause deformed or distorted glass panels that can affect the system's appearance, energy efficiency and safety. A double glazing repair inspector looks for warping during an inspection and recommends repair double glazing measures if needed.

Glazing inspections should begin by making sure the work area is clear of obstructions and all workers are wearing appropriate safety equipment. Gloves, hard hats and high-visibility vests are all part of the safety equipment. It's also recommended to use a ladder and harness to gain access to higher or difficult-to-access areas.

Common repairs for wooden windows include missing or loose hardware. Two-part epoxy can be used to repair minor cracks in wooden window panes, but severely damaged or rotten wood should be replaced. Sliding sashes stuck in their tracks can be cleared by sanding them, then applying graphite grease. More stubborn problems like replacing sliding mechanisms or major sash or frame parts are usually left to aluminum window companies.

Replacing an existing curtain wall system typically involves an upfront cost that is higher than rehabilitation options, however the energy savings and improved quality of life for the occupants may eventually cover the initial investment. In addition, a new system could help bring the structure in line to more strict building code requirements for insulated double glazing windows repairs and wind load resistance.

Sash Issues

Visual inspections can help identify and address many sash window problems. Things like rotting timber and paintwork damage as well as broken glass are all detected with a professional assessment of the window, ensuring the window is in good condition for future use. The most common problems are easily rectified and don't need replacement.

Problems such as the sash not closing or open can be annoying and impact the efficiency of your home. Your windows could also be dangerous if they suddenly slam shut. This can cause injuries, property damage, and even a loss of air conditioning or heat.

Regular maintenance is necessary to keep sliding sash windows in good condition and operating properly. Cleaning your sash window and spraying lubricant on it can make them easier to open and close. If the problem persists, it could indicate that the balances aren't working properly or there is a problem with the sash.

Wooden window sashes take in moisture over time and are affected by changes in humidity. They can expand and shrink, which could cause them to become stuck or jammed within the frame. This is prevented by maintaining a an encapsulated seal around the wood, and by applying a sash paint or sealer to guard against moisture.

Other sash problems include a damaged lock, cord displacement, and nail jamming. These all make it difficult to open and shut windows in sash. A carpenter can fix these problems by removing the sash, fixing or replacing damaged components, then reconnecting them.

It is possible to re-stain stained glass windows to restore their original appearance. It is important to keep them in good condition to safeguard the glass from water ingress and rot which could occur when the paint begins to peel and crack. Re-leading stained glass is another way to stop it from leaking into the surrounding wood and causing decay.